How to program puxing 777

how to program puxing 777

Programming the Puxing PX-777

The trick on this PX is to avoid using the VFO/Memory mode. If you program into your radio all the channels you need, you may seldom need to use your radio in the vfo/memory mode. But, it is good to know how to use the vfo mode, as sometimes you get surprised by a new or changed frequency. Basically, you can program the radio using the SELF programming mode. As you scroll thru this . To program a PX from PC you need four things. A PC, a PX, a programming cable and some software. Your PC will need to be able to run windows programs. I haven’t tried wine. I suspect that 98/Me will work OK – I plan to try it later just for the hell of it. Under Windows XP you might have problems but it can be fixed.

Post a Comment. View my complete profile. If you are thinking about buying one, or have one but haven't programmed it through your PC, it can get messy. To program a PX from PC you need four things. A PC, a PX, a programming cable fo some software. Your PC will need to be able to run windows programs. I haven't tried wine.

Under Windows XP you might have problems but it can be fixed. If you are using Vista then you can fix that by upgrading to Windows XP. The programming cable can be purchased online.

You can apparently also use cables designed for Kenwood handhelds. As a ham you might want to make your own. It's not that difficult. There's a hand drawn circuit here. Make sure the lead to the radio is as short as possible. It will also be prone to interference. Serial ports aren't that common any more, so you might have a USB converter or want to buy one.

Look for your port there. The next problem is that some of the software allows you to select only comm port 1,2,3 or 4. USB adaptors usually end up being comm 5 or higher. This is very poor programming. You hkw get around that by reassigning the comm port of your device. As administrator, right click on the port in device manager, select Properties, click the Port Settings tab, select the Advanced button, and use the dropdown to select a new port.

Hopefully you will find one of the first four free. After you close all bow windows you just opened, you might need to unplug the device and replug to gain access to the new port.

Shops that sell Arduino or robotics might carry these. Also look here. The SIL connector is standard 2. Keep the wires short! I bought a 3. Did I mention short wires? As for the software If you look hereyou will find some programming software. See if you can work out which one to download. Yes, it is as of this writing "V6". If you use windows XP or any of the other NT versions and are like me then you log into the OS as howw regular user limited account and not as an administrator.

If you do the latter then suffer! The problem with some programmers is that they aren't really programmers. They just write programs. And usually while they are logged in as an administrator.

They never test their software as a user. If they did, they would see that they make the same old mistake time and time again. Save files in the application install directory. Why is this stupid? Well you can't write into install hkw if they are in a system directory unless you have rights.

Eg admin rights. Files like settings and other user stuff are supposed to go in the user's home folderer, preferably in the application data folder which is what it's there for. This also 7777 you can have multiple users on one PC without each stomping on the others' settings. How to get around this? Well you can install the application to a folder that anyone can read and write, or you can install the what are the jewish symbols directory and then copy the whole folder somewhere else.

I chose the latter. This is where I keep all unfriendly applications. There's plenty of them. You have a copy remember? Hey presto, language is now English. The application has the default MFC icon blue, cyan and white. They could even be bothered to install their trade icon in the application. That will be remembered for next time you run it. Next, make sure puxnig set the comm port - Click on the "Port" menu. It defaults to port 1 and is NOT remembered for next time.

Next, click on the "Program" menu adnd select "Read from radio. If that works immediately then you are ready to roll. If it doesn't work then you will need to check how to forward google mail your cable is correct and that you have selected the correct port.

Also make sure you have selected the correct model of radio Labels: ArduinoPuxingSparkfun. No comments:. Newer Post Older Post Home. Subscribe to: Post Comments Atom.

Other Resources

Oct 08,  · This will only help you enter the frequencies and receive not transmit. hope it helps you. any questions? Programming 1 Turn on the radio. If you see a channel name like ‘CH?’, you’re in channel mode. Turn the radio off, hold down ENTER, and turn it back on. You should now see a frequency display. 2 If there is a 2?digit number displayed under the battery indicator, you’reFile Size: KB.

To program a PX from PC you need four things. A PC, a PX, a programming cable and some software. Your PC will need to be able to run windows programs. Under Windows XP you might have problems but it can be fixed. If you are using Vista then you can fix that by upgrading to Windows XP.

The programming cable can be purchased online. You can apparently also use cables designed for Kenwood handhelds. As a ham you might want to make your own.

Make sure the lead to the radio is as short as possible. It will also be prone to interference. Look for your port there. The next problem is that some of the software allows you to select only comm port 1,2,3 or 4. USB adaptors usually end up being comm 5 or higher. This is very poor programming. You can get around that by reassigning the comm port of your device. As administrator, right click on the port in device manager, select Properties, click the Port Settings tab, select the Advanced button, and use the dropdown to select a new port.

Hopefully you will find one of the first four free. After you close all the windows you just opened, you might need to unplug the device and replug to gain access to the new port.

Shops that sell Arduino or robotics might carry these. Also look here. The SIL connector is standard 2. Keep the wires short! I bought a 3. Did I mention short wires? As for the software… well Puxing make great radios. If you look here , you will find some programming software. See if you can work out which one to download. If you use windows XP or any of the other NT versions and are like me then you log into the OS as a regular user limited account and not as an administrator.

If you do the latter then suffer! They just write programs. And usually while they are logged in as an administrator. They never test their software as a user. If they did, they would see that they make the same old mistake time and time again.

Save files in the application install directory. Why is this stupid? Eg admin rights. How to get around this? Well you can install the application to a folder that anyone can read and write, or you can install the default directory and then copy the whole folder somewhere else.

I chose the latter. This is where I keep all unfriendly applications. You have a copy remember? Hey presto, language is now English. The application has the default MFC icon blue, cyan and white. They could even be bothered to install their trade icon in the application. That will be remembered for next time you run it. It defaults to port 1 and is NOT remembered for next time.

If that works immediately then you are ready to roll. Cookies on this site are used to personalize content and ads, to provide social networking features and analyze traffic.

We also share information about your use of the website with our partners social networking, advertising and web analytics who can combine it with other information provided to them or they have gathered from the use made of its services. Find out more.

1 thoughts on “How to program puxing 777

Add a comment

Your email will not be published. Required fields are marked *