How to paint a wood vanity white

how to paint a wood vanity white

How To: Paint Bathroom Cabinets

Nov 05,  · Applying Paint Download Article 1. Apply a thin coat of primer to the vanity and drawers/doors. Use a brush to cover the edges with primer, then finish 2. Pick from oil-based, latex, 93%(16). Oct 16,  · The white arrows indicate the direction the wood grain will go. The taped off areas will get the wood grain going in the opposite direction. I start a wood grain paint stroke on the tape and end on the tape. That way there is not any start and stop paint stroke marks on the doors.

Post a Comment. I have been working on a bathroom vanity this past week. The vanity was an off white and I am painting to look like a dark walnut wood. Here are some before pictures. The first step is to clean all the surfaces bow be painted. After taking all the doors how to draw a 737 drawer fronts off I clean the paing.

Cabinets in baths will have soap on them so you have to be really good about getting all surfaces really clean and soap free. Then I do a light sanding, more of wiping the surface with a or grit sandpaper just to scuff it up a bit. When that is all done I prime the surfaces to be painted. I use a dark gray primer then on this job I used a SW color called Toasty for the base coat of paint.

Once the base coat is dried I start to paint the wood grain on the doors. The next two photos show how I tape off the doors. The first one is actually a drawer front but I paint them the same way. The next two photos show how I have taken off the first taping and I have finished the wood grain pattern in that direction. So you can see how the next step is to paint in the wood grain on the end in the opposite direction.

Two close-ups of the work. Just look at how nice the corners come out using these steps. The white arrow shows how much of the hinge footprint I leave after the base coat goes on. This way when I re-install the hinge it will go back ;aint the exact position it was in. The next photo shows woox framework painted to look like wood. I got all the framework complete yesterday and I need how to be a barber seal it with a clear sealer today and put back on the doors and drawer fronts, touch up the walls, then I will be done.

I wish I could take some better pictures of this job but in the small space it's hard to get any. I will try again today and maybe I'll get some better ones. In the next photo the white arrows show how I number the drawers and when I take off the drawer front I number the back of that too with an arrow indicating which way was the top of the drawer front. In that manner I assure I will get the right drawer front on the right way. Believe me it how to remove subtitles from a dvd a difference.

No comments:. Newer Post Older Post Home. Subscribe to: Post Comments Atom.

You Can Paint A Steel Garage Door To Look Like Wood

Jan 25,  · Painting a bath vanity is an easy way to update your bathroom without doing a full renovation. We'll show you how to properly sand, prime & paint your vanity. Aug 05,  · Very very lightly sand (just to scratch the surface of the wood for better adhesion) Paint 3 light coats of your favorite Behr Marquee color. That’s it! I told you it was easy, didn’t I? ??. Okay, here’s the more detailed process of how to paint your bathroom vanity.

I finally decided to bump this project to the top of the to-do list and knock it out before my oldest daughter comes home from college for the holidays. And closer up you can see that the cabinet doors were a hot mess with a lot of wear and tear from previous owners:. I put a dropcloth on the floor and set up a folding table covered with a second drop cloth to lay all of the cabinet doors and drawer fronts on. If your cabinets have any nicks or scratches, fill those too.

Once the wood filler has dried, sand your filled holes, nicks, and scratches smooth:. After everything is sanded, vacuum off the sanding dust and wipe all of the surfaces down with a clean microfiber cloth. The next step is to brush and roll on the bonding primer. Since my bathroom vanity was previously stained and coated with a glossy polyurethane, I chose Sherwin-Williams Extreme Bond Primer which is made for adhering to hard to stick surfaces.

It truly sticks to anything — I highly recommend it! Once thoroughly dry, I flip the doors over to paint the front, using a combination of a paint brush and roller.

Having the right tools makes all the difference for this step and every other step in this project. Investing in high-quality tools will keep you from getting the excessive brush marks and lint that come from using cheaper products and can ruin your final finish. Just like with the primer, start by rolling the paint on the back and edges of the vanity doors and drawers. The key to getting an ultra smooth finish is to use the right paint, brush, and roller for the job. I chose Alabaster for my paint color which is a white with just a touch of warmth quick tip: when choosing a white paint color, use a cool white if your vanity top has cool colors in it and a warm white if your vanity top has warm colors.

I used the same combination of the Purdy 1. The combination of this Purdy paint brush and mini roller results in a beautiful, ultra smooth finish:. Along with painting both sides of your vanity doors and drawers, remember to paint the frame of your bathroom vanity too. Once you have a coat of paint on the vanity frame and both the front and back of the vanity doors and everything is thoroughly dry, lightly sand all of your painted surfaces and repeat the process with a second coat of paint.

After your last coat of paint, give your doors and drawers at a day or two to dry before reinstalling them on your vanity. Also reinstall any accessories that attach to them. And the large door in the middle that looks like a cabinet is actually attached to a pull out hamper so I had to reattach the newly painted door front to it:.

I was surprised by what a difference it made! I chose Sherwin-Williams Emerald Interior Latex paint in Alpaca Matte finish which is a very light greige that complements the granite and the floors so much better! I hope that including so many details will make this a clear, easy to follow project that you now feel confident tackling!

This site uses Akismet to reduce spam. Learn how your comment data is processed. Looks Wonderful! I so appreciate your step by step tutorials. This is one reason why I follow you. You are an inspiration! Thank you. Thank you for this very comprehensive guide and all the photos. It is great that you included the time it took to paint the vanity. You make this seem like a do-able project! The results are very nice. Timing of this post is amazing. I am starting at my kitchen cabinets with a small budget.

I wish I had more energy and stamina — my cabinets need it so badly. Wanna come to Columbus and let me hire you? I actually do know someone in your area who has a cabinet painting business — check out Jenny at Evolution of Style blog! Kris, You did a wonderful before and after tutorial!!!

I love how you explain every step you do. It really helps when you are a rookie at painting furniture. I just love your blog site and look forward to your emails and info on where to buy products.

You are soooo good at blogging and your post is soooo informative!!!! Thanks so much Kris, your blog friend, jean. I have shades just like your old ones — where did you find the new ones?

I really like them and intend to buy them. Aww bummer I can find the lamp shade from the link you posted. How do you know the size or are they standard? I had already purchased a new fixture to install but now all I have to do is replace the globes!

Kris, this made all the difference in the world! Thank you for sharing- I may just have to tackle ours! This is so amazing Kris! What a transformation and a savings! What do the painters tripods look like and are they Purdy as well? You are truly so talented and a fabulous blogger! I should have included a good pic of those!

I use four under each cabinet door. I really appreciate your sweet words! Thanks for your inspirations and awesome ideas!! Thanks so much , Kris. I really should write oftener to tell you how much I appreciate your blog and your many talents. The painting tutorial was fantastic! Kris, you did a wonderful job, her bathroom looks so fresh and updated. Purdue brushes are the only brushes I use.

I have a whole collection and they are the best for all my painting projects. What a huge improvement. You always do such a thorough job. Whoever buys your Connecticut house is going to be thrilled with all of the upgrades. Seriously awesome step by step guide- thank you! The bathroom is beautiful. What a difference painting makes. Where did you het the replacement light fixture glass? I didnt know they were available. Very fun. Thanks Carol!

Looks great, and a heads up when I did all my cabinets I used a flock roller. The finish result is so much better.

Thanks Lisa! So very helpful Kris! Makes it easier to duplicate. The space turned out great! Thank you Fran — I always like as many details as possible when doing projects so try to include whatever I can! So glad you find it helpful! Paint has always been my favorite budget friendly redecorating tool.

I totally agree on using quality paint, brushes and rollers. You tutorial is to the point and easy to understand. The vanity, walls and light fixtures look great! Can you tell us where you found that great hardware. The new bathroom looks amazing! You have inspired me to try something similar with our tired, old outdated bathroom.

I love the new hardware, are the pulls available online? I looked at your finish product and wondered if you plan on putting a frame easy to make around your mirror to give it a custom look. Hi Liz! So I decided to go the tried and true route — takes a little longer but I know if will work in the long run! One question, how much paint did you need to do the vanity? Great tutorial… It gave me the confidence I needed and followed everything step by step.

4 thoughts on “How to paint a wood vanity white

Add a comment

Your email will not be published. Required fields are marked *