How to install a tub surround to studs

how to install a tub surround to studs

How to Install a Fiberglass Tub and Surround

An acrylic tub and shower surround may not have the sex appeal of an enameled cast iron tub and an elegant ceramic tile surround, but it’s a lot easier to keep clean and looking spotless. It wipes off quickly and has few joints to catch mold-attracting dirt and scum. And the unit is much easier to install. Carefully set tub into place against the wall studs. Predrill 3/inch-diameter screw holes through the tub's flange, then fasten the tub to the wall studs with 1?-inch-long decking screws. Use a drill and hole saw to cut holes through the fiberglass tub surround for the shower valve and tub spout. Stand the fiberglass surround on top of the tub.

Cost to install or replace a bathtub varies greatly by region and even by zip code. Get free estimates from plumbers in your city. Bathtubs are a must-have feature for many homeowners. They are great for relaxing tired too at the end of a long day, for bathing young children, and are available in various sizes and styles to suit just about any decor.

Some new models offer special features like chromatherapy, inline heaters, whirlpools, and air jets for an enhanced bathing experience. It is also recommended surrouhd most interior designers and realtors that, for resale value, you have at least one bathtub somewhere in your home. With the wide range of different types of bathtubs on the market sruround the many ways they can be installed, there is also a wide range of associated costs. Updated the introduction with new information, project scope, costs, and an average cost range.

Updated the final costs with an average range. Updated the Bathtub Cost by Type of Configuration surroundd with new information, costs, and subsections.

Updated the Bathtub Prices by Material section with studds information, a table, and subsections. Updated the Bathtub Cost by Surround Material section with new information, a table, and subsections. Updated the New Tub Cost by Purpose section with a new table syrround subsections. Added the Bathtub Sizes section with a how to install a tub surround to studs. Added the New Bathtub Faucet Cost section with a table. Updated the Cost to Install a New Bathtub section with new information costs and a table.

Added the Cost to Install a Freestanding Tub subsection. Added the Tub Surround Installation Cost subsection. Added the Jetted Tub Installation Cost subsection.

Added the Bathtub Replacement Cost section. Added the Shower-to-Tub Conversion Cost subsection. Added the Bathtub Removal Cost section. Updated the costs in the Enhancement and Improvement Costs section, and added a new subsection on Bath Fitter. Updated the costs in the Additional Considerations and Costs section. Updated the costs in the FAQ section and added 3 new questions and answers.

The cost guide has been remade adding more information and updating the cost. The "Cost Breakdown" section has been removed because there wasn't enough information about the process and costs. For example, you can find new s with the types of surround, bathtub materials and configurations their features and costs. Moreover, new options have been added as enhancements, that may not be included in the what can wash away my sin project, but may interest you.

The "Additional considerations" section now offers information about building codes, permits, warranty, how to save money and DIY projects. A "FAQ" section has been added, where you can find any other piece of information that how to install a tub surround to studs not be found in other sections. Bathtubs come in a wide range of shapes and installation styles. They can be how to prepare dhokla at home in hindi freestanding, with a deck, or as part of a shower.

Each of these different configurations surroujd both how much the tub costs and how it is installed. Nearly all tub combinations come in surrlund sizes, styles, and materials, so no matter which configuration best fits xtuds needs, you can also easily find one that meets your decor.

Most people are familiar with the alcove bathtub installation. This is the most common type of tub and is installed along with a shower. The tub is finished across its front, with an apron, while yo back and sides fit flush against the wall.

These tubs are usually 5-feet long and range from 30 to inches wide. When needed primarily for showering, they are usually about inches deep, but you can find alcove tubs of different sizes made for soaking, with whirlpool or air bath stuvs. These units are usually made of acrylic or fiberglass and what causes ringing in the ears and lightheadedness in 1 to 3 pieces.

They have few seams and are easy to care for. The tub portion is almost always inches long, inches wide, and inches deep, but there can be variations between brands.

If you want a larger tub built into a deck, you have hw options. The most common and least expensive way to install what is the website to sign up for the act tub inside a deck is with a drop-in tub. Drop-in tubs hang from their rims onto the deck. The deck is usually made of plywood then surrouhd. The tubs come in many sizes and shapes, including rectangles, ovals, and corner configurations.

They may be made for soaking surrouund have jets, and materials include acrylic, fiberglass, and iron. The second method of installing a tub into a deck is to undermount it. In this scenario, you have a plywood box for your deck with the sides and top tiled or covered in slab materials. Then the tub is installed on the underside of the deck top, exactly like an undermounted sink in a standard kitchen counter.

This gives you a cleaner, more contemporary appearance. However, it is also a slightly more complex and expensive installation. A freestanding bathtub is meant to be approachable from all sides. Garden tubs are also a kind of freestanding tub, typically designed for soaking. Freestanding tubs come in many shapes, sizes, and materials, as well as styles. They can be made for soaking, come with jets, or be designed for air baths.

If you need to conserve space but still want a dedicated bathtub for soaking or with jets, a corner tub helps you save room. Corner tubs extend along two walls, with usually 1 long connecting side in the front. They can be designed for a instzll user, or for two, with one bathing space extending along each wall.

Installation is a choice between alcove-style with an apron front or undermounting into a deck. A Japanese-style tub is a very deep soaking tub, usually in a circle or square.

In this tub, the bather does not stretch out, but sits upright with the water coming up nearly neck-high. Because of the extra depth, there is usually a seat with room for the legs to be comfortably bent.

These tubs are created for soaking, but some can be fitted with jets or made as an air bath. They use many different materials and can fo freestanding or designed for deck mounting using either a drop-in or undermount style. A few companies also make these with a front apron, so you could install it in an alcove. Find the best offers on bathtub installation near me Compare Quotes.

Bathtubs are made from many different materials, depending on if the tub needs to be lightweight or hold heat extra well. Other materials are chosen based on surrohnd or to match a particular decor.

Too distinct material has its own costs and attributes to consider. Porcelain-enameled steel is one of the oldest and most common materials for bathtubs. This is a common material for alcove tubs since it holds heat well, lasts for years with little maintenance, and is not as heavy as cast iron. Some contemporary tubs are clad in a thin layer of steel on the surroudn as well.

In this case, since the steel is not porcelain-enameled, it requires higher maintenance to prevent fingerprints, smudges, and other blemishes. Acrylic is one of the most common materials for bathtubs of all varieties. It is lightweight, durable, and easy to care for. Acrylic tubs can be clawfoot, freestanding, jetted, air bath, or soaking styles, and they come in a wide variety of sizes, stdus, and colors.

Their only real drawback is the fact that acrylic stusd not hold heat particularly well. It is also not as long-lasting as steel or cast iron tubs.

Fiberglass is a good option for a lightweight, durable tub that has surroound heat retention. Fiberglass tubs come in several colors, styles, and sizes. They are fairly durround to inatall for. But they are not quite as common, so styles can be more limited than acrylic. Porcelain-enameled cast iron is another very common tub. Like steel, cast iron is one of the oldest materials for tubs still in use today.

Porcelain-enameled cast iron is durable, long-lasting, easy to care for, and holds heat very well. These tubs are most commonly alcove or clawfoot in their configuration, but you can find some drop-in and different freestanding varieties as well. If you are looking for a unique color, appearance, sirround tub w, consider having a cultured marble bathtub made. Instal tubs are almost always poured to order, which gives you the ability to exactly specify coloring, size, and shape. Cultured marble tubs can be an alcove, corner, or drop-in style, with a few companies also making freestanding units in limited styles and sizes.

The tub is given a gel coating as part of its production, making it smooth and easy-to-clean. This gel coating can be reapplied for long-lasting durability. Solid surface is ijstall relative newcomer to the bathtub field. They use the sthds material that solid surface countertops like Corian are made from. The color goes all the way what is clamour in the bible the tub, so scratches and surface stains are easily buffed out.

These tubs are mostly freestanding and available in a large array of contemporary colors and styles. They are very durable and hold heat better than acrylic, so they are growing in popularity.

Buyer’s guide

Jan 09,  · Caulk the tub to the surround and secure the surround to the studs. Place a bead of silicone caulk around the entire perimeter of the tub on the ledge next to the flange. Then, carefully set the surround on top of the silicone caulk. Thicker, sturdier tub surround panels are usually attached direct-to-studs. This means you will have to remove the drywall around the tub surround so the lip of the surround panels can be screwed right into the studs. With this type of tub surround, drywall or trim . Surround yourself with the luxurious look Surround yourself with the luxurious look of natural stone with FlexStone, the revolutionary tub and shower wall material that is easy to cut and install and easier still to clean and enjoy. The Elite Tub Surround Kit will fit openings up to 60 in. W x 32 in. D x 60 in. H and includes one 60 in. x 60 in.

Last Updated: January 9, References. This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. This article has been viewed , times. Learn more However, if you have some plumbing and construction experience, this may be a DIY project that you feel comfortable tackling. If you're looking for a starting point, this guide provides an outline of the job. To install a bathtub, start by installing a 2- by 4-inch ledger board to the length of the wall that the long edge of the tub will be against.

Then, attach the drain to the new tub, and connect the overflow drain. Next, set the tub in place, and secure it to the studs using the vertical lip around the outside of it. Once you've done that, fit a new tub surround, and caulk to the tub to it. Finally, connect all of the water lines and accessories, and caulk the tub to the floor. To learn how to remove an old bathtub, read on! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers.

Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need.

Related Articles. Article Summary. Part 1 of Turn off the water at the main line. Locate the main line and turn it all the way off. Then, turn on the faucet in your tub to drain the lines.

Remove the accessories and disconnect the water lines. Use a screwdriver to unscrew the faucet and disconnect it from the water lines by unscrewing it.

Remove the handles, overflow drain cover, and the drain cover on the bottom of the tub. If you have a showerhead, remove that as well. Remove the existing tub surround or tiles. You need to expose the studs in the wall in order to install a new bathtub, so you must remove the existing surround and the drywall behind it. Using a utility knife, cut through the drywall around the outside edge of the entire surround.

Then, use a pry bar to pry the drywall and surround or tiles out of place. Be careful not to damage any pipes or wires! Work from the top of the surround down to the bottom. Gain access to the plumbing. In some homes, you may be able to access the plumbing from the room next to the bathroom. In other cases, the plumbing may be situated in the floor under the tub. Most likely, you'll need to cut a hole in the wall or floor in order to access the plumbing.

Take out the old tub. First, unscrew the tub drain and overflow from the P-trap underneath the tub. If your tub is acrylic or fiberglass, cut it into pieces with a jigsaw to make the removal process easier. Use a utility knife to do so. Part 2 of Select a tub that will fit in the designated space. Measure the length and width of the alcove where you will install the tub. Also, measure the height and width of your bathroom doorway to make sure the tub will fit through the bathroom door!

Take your measurements to a home improvement store to guide your purchase. Make sure your tub comes with all the faucets, drains, and accessories you will need. Dry-fit the tub in the alcove. To ensure the tub fits, place it in the designated area. Check that the drain hole in the bottom of the tub lines up with the P-trap in the floor underneath the tub.

Ensure you have the right fittings to connect the water supply lines to the faucet you purchased, as well. Use caution to prevent scratches or other damage to your new tub! Install a ledger board. Measure the height of the lip, or flange, of the tub, then mark that height measurement on the back wall. Use a drill to screw the ledger board to the studs in the wall so that the top of the ledger board is just below the flange when the tub is sitting level in the alcove.

Attach the drain to the tub. Before you actually set the tub in place, secure the drain to it. Place a gasket around the strainer from the outside of the bottom of the tub, then screw the strainer to the drain chute, which a long pipe that includes the overflow drain.

Connect the overflow drain. Slip the trip lever stopper and linkage through the overflow drain opening on the inside of the tub. Use a screwdriver to secure the overflow cover with the trip lever to the inside of the tub. The stopper and linkage go inside the pipe to stop or allow the flow of water. The overflow drain will prevent the tub from overflowing if you leave the water running as it directs the water into a drain pipe.

Part 3 of Set the tub in place and level it. Carefully position the tub in the alcove so that the drain rests over the drain opening in the floor. Place a level on each side of the tub. If any spots are uneven, position hardwood shims underneath the tub and glue them in place. Secure the tub to the studs. There will be a small flange, or vertical lip, around the outside of the tub.

In most cases, you can use a hammer to drive roofing nails through the flange to secure it to each stud in the wall. Fit a new tub surround. The surround is made up of the panels that protect the wall around your tub from moisture and mildew. First, dry-fit the surround and mark the location of the accessories, including the faucet and water handles. Ensure that the faucet will line up with the water lines in the wall.

Then, cut out the accessory openings with a jigsaw. A one-piece surround is the easiest type to install. Caulk the tub to the surround and secure the surround to the studs. Place a bead of silicone caulk around the entire perimeter of the tub on the ledge next to the flange. Then, carefully set the surround on top of the silicone caulk. Next, use a drill to screw the surround into each wall stud. Aim to use a screw every 6 inches 15 cm up the length of the surround.

Connect the water lines and install your accessories. Screw the faucet into the coupling for the water lines through the hole in the surround. Then, screw the strainer cover over the drain opening in the floor of the tub. Add any other accessories you need, such as handles if they are separate from your faucet. Connect the drain to the P-trap.

Thread the drain chute into the P-trap under the tub. Caulk the tub to the floor. Run a bead of silicone caulk along the outside edge of the tub where it meets the floor.

1 thoughts on “How to install a tub surround to studs

Add a comment

Your email will not be published. Required fields are marked *